Gertrude Boyer Dining Table November 23rd, 2018 - 02:47:08
My extendable table is 10 foot long, but the table itself is 16 inches long by 42 and got two extendable extensions, a 28 inch age so and is an in the middle. I got four inches, that is the holder who holds the sliders in a place. Okay, what I want to show how to cut these sliders because is the trick with by accident. I cut it around the side. My wrong side is, you know, cut it this side and this side I supposed to cut it on the top and one to bottom. But by mistake, I cut it. Both sides are fixable but, as a is a trick like I said, okay, the chunk I took it from, I put it back right here. I glue it and put the screw on, but I lost 1/8. Oh, it's not big deal to 1/8. Yes, it is because, when you pull out the extension, the 1/8 sags down, the extension is 1/8 by the table, but all the way in 2018, just 1/2 inch is going to look going down or if it's more 1/8, that means is going to stay up a Lot of bad, so I have to redo it to cut it.
The right. Are you build it this? I don't know what they call but yeah. I make it and works perfectly. What I'm doing just to slide this all right here? Okay, Oh make a share, is on the right side, all right, oh yeah! this is a side. I want to cut it. Okay, you, okay, I got to ready the sliders to go in an in a place. I'm going to put the glue first in everyone make sure is flat right here. You I got to wait for two or three hours to dry the glue, and I can test it. Your table can be used just a standard table or with extension, if you have more people and right now, the length from five foot right. There is seven and four inch right here. Also with the other extension, another side can go ten foot long, the top comes off two sliders, they come off the legs come off and, if needed, to move it somewhere else is easy to move it because just like this is very heavy right now yeah. It's very heavy, the length of the slider is depended on the frame right here.
The sliders fit inside the frame, that's tied and outside this pram this side. So if the pram cell is sixty inch - and this is six inch - but one side should be in and the other side should be out because we got the nuts right here - who let this comes out of, this slider is three inches wide. But here's an inch and half and same is this side. Inch and the half can be smaller and lightweight. It depends on the size of the table and adjusts can be enough in an in a nurturer. I hear the depth you can make it. I mean the bigger or smaller depends on how the cup